Get the most from your solar PV for summer cooling
![](https://renew.org.au/wp-content/uploads/2018/12/Solar-pv-cooling.jpg)
Cooling your house using your rooftop solar system requires a bit of thought and planning, but when you get it right, the savings can be well worth it.
Imagine it’s a hot summer evening. You’ve just arrived home to a stifling hot house. Your solar photovoltaic system has wound down for the day, but nearly all that generated energy was of little immediate personal use since you weren’t home. So, how can you improve the usefulness of you solar photovoltaic (PV) system for cooling in summer?
Assuming you already have a powered cooling system, then your options are broadly either: pre-cooling you house during the day to mitigate the need to use air conditioning once the sun goes down, or adding battery energy storage.
How much power?
To use our cooling systems optimally with our solar we need to understand the capacity of each. After all, if your aircon draws, say, 10 times the power that your solar can provide, then this question is moot because we’ll end up taking most of the energy from the grid regardless of what the solar provides.
Aircon systems have a rated capacity in kilowatts (kW). However, this is watts of thermal power, not the electrical power level that the system will draw. Generally, the maximum electrical power that an aircon will draw is (approximately) the rated thermal power divided by about three to five (the coefficient of performance). For example, a 6kW aircon unit with a coefficient of performance of three will draw electrical power at a maximum of 2kW.
Solar PV systems also have a capacity in kilowatts. This capacity is the peak electrical power that the system can generate, which might correspond to midday on a sunny day for north-facing solar panels.
To make best use of our solar PV system, we want to consume all of its generated energy within the home. Surplus solar energy is exported to the grid, not wasted. However, it’s much more cost effective to use that energy within the home because the benefit to the homeowner of exported energy is small, unless they have one of the older high-rate feed-in tariffs.
![](https://renew.org.au/wp-content/uploads/2018/12/Solar-pv-cooling-1.jpg)
Option 1: Pre-cooling
Am I exporting?
Just because the solar panels are generating, doesn’t mean there is necessarily surplus power for optimal pre-cooling. Making the right choices for pre-cooling depends on knowing, at any time, whether there is surplus solar power. This requires something like an in-home display (IHD), sometimes referred to as an ‘energy monitor’. An IHD communicates directly with the home’s meter box to measure and display the flow of electricity in or (with surplus solar) out of the house.
An IHD will normally show a negative power level if the home is exporting surplus energy. Examples of general-purpose IHDs are Efergy and Watts Clever.
Good thermal envelope required
Pre-cooling is using your cooling system earlier than actually needed for comfort to make best use of your own free solar electricity when it’s available. In a sense this approach is storing the solar energy as useful coolness of the home. The usefulness of this approach depends on your home’s thermal envelope. For example, if your home is able to keep out the hot summer sun, and it’s made of (reasonably) heavyweight materials, and it doesn’t have too many draughts, then it will be able to hold on to coolness introduced by your cooling system for long enough to be useful after the sun goes down.
If one or more of these things aren’t true for your home then chances are your home will lose its thermal comfort quickly on a hot day once the active cooling is removed. Perhaps it’s also worth mentioning that if your home has a great thermal envelope, then the need to pre-cool is probably less to begin with.
To the extent you reasonably can, try to ensure your home has:
– Good-quality and well-installed insulation in ceiling, walls and floor
– Good-quality window coverings
– Exterior window shading, especially for west- and north-facing windows, and
– Excellent airtightness.
Timing is everything
On a hot day, you need to choose the time for pre-cooling based on need (that is, how hot it is) and whether you have surplus solar energy. So, in our scenario we want to be able to turn the cooler on to use the useful solar PV, but we don’t want to be wasteful by having the system operate any longer than necessary.
Getting the timing right should be easy if you’re home – just turn on the cooler as required to use your solar energy to pre-cool. However, if you’re not home then that’s not so easy.
Smart thermostats
So, the challenge is to activate your pre-cooling when you’re not at home. Today, many modern cooling systems come with their own app-based control and wi-fi connectivity. Alternatively, there’s a plethora of third-party control systems, sometimes known as ‘smart thermostats’, that can provide smart activation of your cooling and other things, including when you’re not home. Some smart thermostat systems we know of (in no particular order) are Sensibo, Nest, AdvantageAir, iZone and Airtouch. These work with many, but not all, existing aircon systems.
Working together
These smart thermostat systems let you activate your home’s aircon before you get home. However, they don’t, by themselves, let you do it in a way that is mindful of whether you have surplus solar energy at any given moment. So, if the goal is to selectively use only surplus solar energy to cool your home then one way is to combine a smart thermostat with a smart solar and battery power controller called a Reposit Box, along with a web-based service called IFTTT (if this then that). The Reposit Box knows when you’ve got surplus energy and can signal that to the IFTTT service. Then an IFTTT-enabled smart thermostat such as a Sensibo can trigger the aircon based on your solar. Combining a Reposit Box with a Sensibo smart thermostat with IFTTT can enable smart pre-cooling.
Option 2: Use Battery energy storage
Our goal is to make best use of our available solar energy to lessen the need to buy grid energy for cooling. The other way to have solar energy available after dusk is to store it in a battery. Home battery systems are becoming widely available and increasingly affordable. It’s beyond the scope of this article to look at home battery systems in any detail [see instead Renew’s dedicated solar + batteries pages including buyers guides available on the website]. The most basic capability of a home battery system is to allow delayed access to solar energy. They also bring other useful services to homes and to the grid as a whole.
Cooling our home on a summer evening can be done using our own solar energy if we have a home battery system with a large enough capacity. This reduces the amount of grid energy we have to buy. Although cheaper than they used to be, the high up-front cost of a battery system means that the economics of batteries are currently marginal at best. [See Renew’s research into the economics of grid-connected batteries for more on this.]
Recommended for you
![Building for a changing climate](https://renew.org.au/wp-content/uploads/2024/04/Australia-temp-increases-inc-weather-file-years-816x524.jpg)
Building for a changing climate
Are we building homes for the future, or for the past? Rob McLeod investigates how climate change is impacting home energy ratings and the way we build our homes.
Read more![Getting off gas FAQs](https://renew.org.au/wp-content/uploads/2023/07/iStock-924926456-816x524.jpg)
Getting off gas FAQs
Do heat pumps work well in Australian conditions? Rachel Goldlust explains.
Read more![Air conditioner vs hydronic heating](https://renew.org.au/wp-content/uploads/2019/12/web-1-11-816x524.jpg)
Air conditioner vs hydronic heating
Heat pumps can provide air conditioning or hydronic heating. But which is more efficient, and which more comfortable? Cameron Munro tells us what he learned by trying both in his super-insulated home.
Read moreMore on cooling
![Tradies and the transition](https://renew.org.au/wp-content/uploads/2024/07/iStock-1491264733-816x524.jpg)
Tradies and the transition
Do we need as many tradies for electrification as many think? Not if we are innovative, writes Alan Pears.
Read more![Double glazing on the (very) cheap](https://renew.org.au/wp-content/uploads/2024/07/DSCF0809-816x524.jpg)
Double glazing on the (very) cheap
Do we need as many tradies for electrification as many think? Not if we are innovative, writes Alan Pears.
Read more![Ditching the shower fan](https://renew.org.au/wp-content/uploads/2024/04/f778ff12-f2f2-48b2-adb9-2278cbf6b4c6-816x524.jpg)
Ditching the shower fan
By fitting a lid on the shower, exhaust fans are not needed when showering. John Rogers describes this simple retrofit, using both a commercial product and a great looking DIY version.
Read more