It’s a windy place near Canberra, and Chris Kelman is taking good advantage of that! He describes the evolution of his impressive off-grid wind and solar system — and the avid meter-watching that goes with it.
In a quest to demonstrate the possibility of living a fossil-fuel-free life, I have now made a couple of attempts at setting up my house to run on ‘home-grown’ energy.
My first project, back in 1987, used home-made solar hot water panels, a ‘massive’ 90 watts of PV plus a 1 kW Dunlite wind generator (pictured on the cover of Soft Technology 32–33, October 1989; Soft Technology was the original name of ReNew). At this stage, renewable energy technology was in its infancy and everything was DIY, including building an 18 m tripod tower for the turbine (overcoming a fear of heights was a personal fringe benefit). On this basic system I did manage to run lights, computer, TV and stereo, but there were thin times, of course.
These days, home energy systems are more like Lego — you just plug and play. So with a move back to the bush near Canberra a few years ago, I decided to do it all again, but this time with sufficient capacity to run a standard 230 V AC all-electric house, workshop, water pumps—and an electric vehicle.
The house I purchased had been set up pretty well as a passive-solar home, though it was connected to the grid at the time. It has a north-facing aspect, good insulation and a lot of (double-glazed) windows allowing winter sun to maintain a cosy slate floor. The result is a very stable environment for most of the year.
Energy production—phase 1
In phase one of my new project,in 2012, I installed 3 kW of PV with a Sunny Island off-grid inverter and 40 kWh of VRLA (valve-regulated lead-acid) batteries. Initially, hedging my bets, I configured it as a grid-connected system, with the grid acting as a backup ‘generator’ when required.
After a few months I realised that I rarely needed to use the grid and, as I owned a small antiquated petrol generator from my previous project, I decided it was time to cut the umbilical cord. This turned out to be a rather amusing process. My local energy provider didn’t seem to have an appropriate form for ‘removal of service’ and was bemused about why I would ask them to take the meters away. It was all a bit much for them. Even after the process was completed, I would still occasionally discover lost-looking meter readers around the back of the house!
The weather in this region is well known for its reliable solar insolation, apart from some lean months in mid-winter. Fortunately we are well supplied with wind power as well, as indicated by the Capital wind farm only a few kilometres away.
To confirm the wind resource, I set up a Davis weather station on a 12 m mast at my proposed turbine site and undertook a six-month wind survey. The results from this were compared with historical records from the area and a good correlation was found. This was enough evidence to convince me that wind power backup, particularly to cover the lean winter months, was the best option for my system.
Read the full article about Chris’s impressive off-grid setup in ReNew 134.
This entry was posted on Wednesday, December 16th, 2015 at 5:47 pm