Just add batteries


There’s more to consider than just the brand or size when adding storage to a solar system. Damien Moyse and Nick Carrazzo highlight some of the issues to consider in a field with ever-evolving technology.

There are multiple ways that batteries can be added to an existing or new solar PV system. These different configurations will influence the system’s capabilities so it’s important to carefully consider the approach you take. This article covers the most common approaches currently available in Australia, but note that technology and options are developing rapidly so we will be updating this advice regularly.

The majority of solar PV systems currently installed in Australia are unlikely to be ‘battery-ready’—an existing solar customer cannot simply purchase a lead-acid, lithium ion, flow or sodium battery and have it retrofitted to their existing system.

The solar panels can be retained, of course, but an additional or replacement inverter and charging components will likely be needed to charge and use the batteries.

One approach (DC coupling) involves replacing the existing grid-interactive inverter with a new hybrid inverter; such inverters can both control charging of the battery and conversion of electricity from DC to the AC required for household use. As a cheaper alternative, in a fairly recent development, the replacement of the grid-interactive inverter can be avoided through fitting a DC to DC converter between the solar array and the battery bank—thereby negating the need to replace the existing grid-interactive inverter.

A second approach (AC coupling) requires installation of a second battery-dedicated hybrid inverter (with integral charger controller), with the existing grid-interactive inverter retained.

As such, almost all the new battery products currently on the Australian market are either sold with a new inverter (some as part of an integrated ‘all-in-one’ storage unit and some with the inverter separate from the battery) or require an inverter to be purchased separately.

Thus, most existing solar customers will need to replace their existing grid-interactive solar inverter, add a second inverter or add a DC to DC converter to their system. Which approach is taken depends on whether the system uses AC or DC coupling and the capabilities required of the system. Coupling refers to where within the system the batteries are connected.

Read the full article in ReNew 137.