Solar hydronic systems don’t have to be complex and expensive. Chris Hooley describes his simple and low-cost solar hydronic heater.
WINTERS in Melbourne used to be predictable: four months of sog from May to September. However, whether due to climate change, El Niño or simple drought, the winter of 2010 had a particular impact on me in that I kept coming home in the late afternoon to a very cold house, lit by shafts of brilliant winter sunshine. “Wouldn’t it be good,” I thought to myself, “if I could catch some of that energy and keep the house warm?”
I had a rough idea of what was available to make water hot using sunlight. Being a devoted handyman and incurable tinkerer, the seed of an idea took root and grew. My basic parameters were simple: I wanted a completely off-grid, stand-alone system that would ‘catch’ some energy in cooler months and put it to good use, without having to be plugged in or modified seasonally. Since the house already had gas central heating, the system would not need to meet all heating requirements but would rather take the edge off the cold on days when the sun happened to shine.
With this in mind I prowled eBay and mentally drew up plans until I could stand it no more and started buying parts. The key elements consisted of an evacuated-tube array piped to a fan-forced radiator. The collector heats the water and a pump transfers the hot water to the radiator in the house. A fan forces air through the radiator and into the room, heating it.
The system would be controlled by a thermo-switch and powered by a pair of 20 W PV panels. To avoid it freezing solid overnight or boiling away in summer and to eliminate the need for seasonal draining and refilling, I resolved to fill the whole system with car radiator coolant.
Read the full article in ReNew 127.
This entry was posted on Thursday, March 20th, 2014 at 1:52 pm