Knowing that double glazing can be compromised by incorrectly sealed window frames, Jean and Barry Lambert used affordable thermal imaging technology to check and rectify the installation—and find other sources of house heat losses.
LIVING in Canberra’s cold climate you need to think carefully about heat loss. We’ve done work on our house to improve its insulation, glazing and heating system efficiency. But that doesn’t necessarily translate to the best possible thermal performance if there are gaps or weak spots in the insulation—and that’s where we found a thermal imaging camera came in handy.
Some background on our house
Located in an inner suburb of Canberra, our four-bedroom brick house was built in the 1970s. The major axis runs north–south, with the living area to the west (giving views to the Brindabella mountains) and the bedrooms facing east.
Canberra of course has quite a wide temperature range (it’s in climate zone 7). Outside temperatures on winter mornings can fall below zero, while summers are usually dry and warm.
Canberra’s cold winters dictate that insulation is a priority to reduce heat loss. We insulated the walls with R3 rockwool and we topped up the existing ceiling insulation to an R5 rating. We replaced the original oil heating with ducted gas, and added deflectors on the floor vents to direct hot air away from windows. By varying the airflow rate using the outlet dampers in the floor vents, around a 50 °C outlet temperature is maintained, giving a comfortable 18 °C to 20 °C temperature inside the house.
Read the full article in ReNew 139.
This entry was posted on Wednesday, March 22nd, 2017 at 1:40 am