Although many regions no longer have water restrictions, water is still a very precious resource in a country as dry as Australia. Greywater systems let you use water at least twice, which makes good environmental sense. Here, we look at what systems are available.
The advantage of greywater is that we produce it on a daily basis. In many cases it can be diverted to the garden with minimal effort and cost in a number of different ways. You can opt for a low-cost DIY system using something as simple as a greywater diversion hose attached to your washing machine outlet. Or you might be considering installing a full commercial greywater system. Whichever way you go, there are a number of things you need to consider.
This guide highlights the main issues associated with greywater reuse. There are many choices available and there is no single solution for all circumstances. Therefore, the more research you do, the more suitable your system will be for your particular situation.
There can be many restrictions as to where systems can be installed. In some cases, especially for retrofits, installing a greywater system will require major works—this can make the system cost-prohibitive.
Greywater is any wastewater generated from your laundry (sinks and appliances), bathroom (baths, showers, basins) and kitchen (sinks and dishwashers), before it has come into contact with the sewer. It does not include toilet wastewater, which is classed as blackwater.
However, while kitchen and dishwasher water is technically greywater, unless you are treating it, it is recommended that you don’t use this water source. Kitchen water only makes up around five percent of total water consumed in the average home, yet it is considered the most contaminated. This is partly due to high sodium levels from some dishwashing detergents, particularly from dishwashers, solid matter such as food waste from rinsing dishes, as well as fats, grease and oils from cooking and cleaning, which can all damage soil structure if allowed to build up.
What’s in the greywater?
The chemical and physical quality of greywater varies enormously, as greywater is essentially made up of the elements that you put into it.
Generally speaking, pathogen and bacteria content is low in most greywater sources (unless you are washing contaminated items, such as nappies) and, provided you take steps to minimise potential contact, such as using subsurface delivery of the greywater, it is of minimal concern.
Choosing the right cleaning products is perhaps one of the most important elements in reducing the risks associated with greywater reuse. The elements phosphorus and nitrogen are nutrients necessary for plant growth. If these elements are kept to a suitable level by choosing cleaning products with low phosphorus and nitrogen content, they can replace the need for fertilisers for gardens and lawns—the nutrients can actually be utilised by plants and soils.
The main concerns with greywater are salt build-up from cleaning products and increased pH levels in the soil. Both can have a detrimental effect on your soil and plants. However, they can both be mitigated by monitoring, conditioning your soils for optimum health and taking care to choose cleaning products with little or no salt.
Salt build-up in soils, particularly sodium salts, poses perhaps the greatest risk associated with untreated greywater reuse. The accumulation of salts in the soil can damage soil structure and lead to a loss of permeability, causing problems for soil and plant health. The main source of sodium is powdered washing detergents and fabric softeners that use sodium salts as bulking agents.
Concentrated powders and liquid detergents generally have fewer salts than the average powdered detergent. There are many powdered detergents on the market that now have low or no sodium content.
For more information and a list of products that are greywater friendly, go to www.greysmart.com.au (see the resources section for information on this site).
Generally speaking, pH levels outside the optimum range of between six and seven affect the solubility of soils and hence plants’ ability to absorb essential nutrients. As most gardeners know, pH values range from one (acidic) to 14 (alkaline), with seven being neutral.
As untreated greywater is generally alkaline, if you have an acid-loving garden, you will need to consider the types of cleaning products you use—washing powders generally make greywater very alkaline, as do solid soaps, while liquid soaps tend to be more pH neutral. The pH of greywater can vary depending on the source—shower water is often fairly neutral compared to washing machine water, for instance.
Before you’ve even applied greywater, pH levels can vary from acidic to alkaline from one part of the garden to another. Given this variability and the likelihood of greywater raising the pH of your soil, it is advisable to regularly monitor the pH and condition of your soil. Acidic soils can be made more basic with calcium carbonate and basic soils can be made more acidic with sulphur. To monitor this, pH test kits and soil conditioners are available from most nurseries.
Although salt build-up and pH are of particular concern, there are other greywater components that can have an impact on your soil and plants. They include fats and oils from soaps and shampoos, disinfectants (including eucalyptus and tea tree oil), bleaches, toothpaste, hot water and sheer volume of water—leading to over watering.
For more detailed information on greywater composition, see section 2.4 Composition of Greywater in NSW Guidelines for Greywater Reuse in Sewered, Single Household Residential Premises (www.bit.ly/NSWGreywater) and Oasis Design’s Fecal Coliform Bacteria Counts: What They Really Mean About Water Quality (www.oasisdesign.net/water/quality/coliform.htm).
The complete article looks at greywater system types, use of greywater, greywater regulations and more.
Read the full Greywater Systems Buyers Guide in ReNew 130.
This entry was posted on Monday, December 15th, 2014 at 1:01 pm